 |
|
|
| |
|
|
|
|
|
|
- (13)
- (2)
- (15)
- (3)
- (1)
- (1)
- (28)
- (1)
- (11)
|
|
| |
|
|
Build Your Online Product Catalogs?
| Product Name: |
Solar Fox Wolves And Animal Repeller
|
| Supply Ability: |
100000pcs |
| Related proudcts |
animal repeller, |
| Specifications |
AN-A363 |
| Price Term: |
FOB |
| Port of loading: |
YANTIAN |
| Minimum Order |
5000 |
| Unit Price: |
3.8 |
|
Operating mode:
1. Put it on trees or other places and then turn on the switch to make the product work.
2.The switch (ON/OFF) controls the power supply of the product, and the first mode is to flash once at an interval of 10S and start the second mode after 5 cycles. The second mode is the interval of 10S flashing twice in a row, so that the cycle 5 times into the third mode; The third mode is the interval of 10S gradually light once so that the cycle 5 times and then re-enter the first mode. Repeat the cycle again and again.
Warnning(Top Important)!!!
Battery Instructions
Step 1. When using the device for the first time, please use the device till the power(built-in batteries) is to the lowest: when the red low-voltage indicator will keep blinking or there is no reaction after turn-on the device.
Step 2. Connect the device to a standard USB output out, and use the USB cable in packaging charge the device for 6-12 hours:
2.1: Because of the different power and voltage output by different USB and different activity of batteries, it's normal that the red indicator may keep flashing after charing for more than 12 hours(the device could be used normally even charging is stopped), please just install the device in a normal usage scenario and use it would be OK.
2.2: If the charging time is significantly less than 6 hours, but the indicator kept light up(showed charging finished, not flashing), please continue to charge for at least 6 hours.
Step 3. If the red indicator keeps flashing or the device stop working without any response after using for some time, please repeat Step 2., charge 6-12 hours, after 3-5 cycles of charge and discharge, the charge and discharge characteristics of the batteries would be stable and the charging index tends to be back to normal.
Step 4. Please do follow the three steps above to enable the batteries in the device to maximize their best performance. |
| Company: |
Aosion International (Shenzhen) Co., Ltd
|
| Contact: |
Ms. Karida Lee |
| Address: |
Room 2016&2017,Block A,Building 1,Charming Times Garden,Intersection of Xi Xiang Main Road and Xin Hu Road,Xi Xiang Street,Bao'an District,Shenzhen,China. |
| Postcode: |
514810 |
| Tel: |
86-755-88856358-613 |
| Fax: |
86-755-88856358-611 |
| E-mail: |
|
|
|
Home
